Table of Contents
Advertisement
Removal and replacement procedures
Display assembly
✎
The display assembly spare part kit includes 2 WLAN antenna transceivers and cables, webcam (select models
only), microphone, nameplate, and logo.
Description
14.1-in WXGA BrightView display with a microphone for models with discrete graphics subsystems
14.1-in WXGA BrightView display with a webcam/microphone module for models with discrete
graphics subsystems
14.1-in WXGA BrightView display with a microphone module for models with UMA graphics
subsystems
14.1-in WXGA BrightView display with a webcam/microphone module for models with UMA
graphics subsystems
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the following components:
a. Hard drive cover (see
b. Mini Card compartment cover (see
c. Optical drive (see
d. Keyboard (see
e. Keyboard cover (see
f. Speaker assembly (see
4–28
"Battery" on page
"Hard drive" on page
"RTC battery" on page
"Optical drive" on page 4-20
"Keyboard" on page
4-21)
"Keyboard cover" on page
"Speaker assembly" on page
4-7).
4-8)
4-12)
4-24)
4-26)
Spare part number
580763-001
580764-001
580765-001
580766-001
"WLAN module" on page
Maintenance and Service Guide
4-14).
Advertisement
Table of Contents
