Table of Contents
Advertisement
Memory module
Description
1024-MB (PC2-5300, 667-MHz, DDR2)
512-MB (PC2-5300, 667-MHz, DDR2)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory module:
Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the memory/WLAN module
1.
compartment cover to the computer.
Lift the front edge of the cover (2), swing it up and back, and remove the cover. The memory/WLAN
2.
module compartment cover is included in the Plastics Kit, spare part number 462409-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
3.
(The edge of the module opposite the slot rises away from the computer.)
Downloaded from LpManual.com Manuals
Battery on page
34).
Spare part number
462330-001
462329-001
Component replacement procedures
39
Advertisement
Table of Contents
