Table of Contents
Advertisement
Removal and replacement procedures
RTC battery
Description
RTC battery (includes cable and double-sided tape)
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the RTC battery:
1. Loosen the two Phillips PM2.5×5.0 captive screws 1 that secure the Mini Card compartment cover to the
computer.
2. Lift the right side of the Mini Card compartment cover 2, swing it to the left, and remove the cover 3.
4–12
"Battery" on page
4-7).
Spare part number
486835-001
Maintenance and Service Guide
Advertisement
Table of Contents
