Removal and replacement procedures
Speaker assembly
Description
Speaker assembly for use in all countries and regions except for India
Speaker assembly for use in India
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive cover (see
b. Mini Card compartment cover (see
c. Optical drive cover (see
d. Keyboard (see
e. Keyboard cover (see
Remove the speaker assembly:
1. Disconnect the speaker cable 1 from the system board.
2. Release the zero insertion force (ZIF) connector for the num lock cable 2 from the system board.
4–26
"Battery" on page
"Hard drive" on page
"RTC battery" on page
"Optical drive" on page
"Keyboard" on page
4-21)
"Keyboard cover" on page
4-7).
4-8)
4-12)
4-20)
4-24)
Spare part number
486865-001
486865-D61
Maintenance and Service Guide