Figure 1-15 Replacing The Front Bezel - HP Rp3440-4 - 9000 - 0 MB RAM Installation Manual

Step 2. Rotate the front panel outward and lift it off the server chassis.
Replacing the Front Bezel on a Rack-Mounted Server
Step 1. Insert the bezel latches into the matching slots on the server chassis.
Step 2. Close the bezel and push toward the front of the server until it locks into place.
Figure 1-15
Accessing a Pedestal-Mounted Server
If you are replacing a hot-swappable item, you can leave the server on and external cables
NOTE
(including the power cord) connected.
Removing the Side Cover on a Pedestal-Mounted Server
Step 1. Power off the server and disconnect the power and external cables.
Step 2. Remove the side cover.
a. Grasp both indentations at the top of the side panel and pull outward.
b. Lift the side cover off of the server chassis.
Chapter 1
Replacing the Front Bezel
Installing the System
Installing Additional Components
29