Installing the System
Installing Additional Components
Replacing the Memory Airflow Guide
Step 1. Align the guides on both sides of the airflow guide with the slots on the chassis.
Step 2. Insert the memory airflow guide in the slots.
Step 3. Replace the cover. (See "Removing and Replacing the Top Cover on a Rack-Mounted Server" on
page 26.)
Removing and Replacing the Processor Airflow Guide
Removing the Processor Airflow Guide
Step 1. Power off the server, disconnect power and external cables.
Step 2. Remove the server cover. (See "Removing and Replacing the Top Cover on a Rack-Mounted Server"
on page 26.)
Step 3. Remove the IDE cable and power module cables from the processor airflow guide cable clips.
Step 4. Remove the main portion of the airflow guide:
a. Hold the guide using the opening on top of the guide.
b. At the same time, grasp the back end of the processor airflow guide and lift the guide out of the
server.
Figure 1-30 Removing the Processor Airflow Guide
Step 5. Grasp system fan 1A and lift it from its socket.
42
Chapter 1