Figure 1-44 Locking The Dual Processor Module In Place; Figure 1-45 Slide The Sequencing Retainer Plate - HP Rp3440-4 - 9000 - 0 MB RAM Installation Manual

Installing the System
Installing Additional Components

Figure 1-44 Locking the Dual Processor Module in Place

Step 9. Slide the sequencing retainer plate toward the front of the server.

Figure 1-45 Slide the Sequencing Retainer Plate

Step 10. Screw in the four heatsink captive screws in a criss-cross torquing pattern by alternately
tightening the screws so as not to completely tighten one screw before the others.
58
CPU Install Tool
(2.5 mm Driver/Allen
Wrench)
Chapter 1