Configuring Snmp Notifications; Defining Snmp Notification Global Parameters - HP BladeSystem bc2000 - Blade PC User Manual

Configuring SNMP Notifications

This section contains information for configuring SNMP Notifications, and contains the
following topics:
■

Defining SNMP Notification Global Parameters

■
Defining SNMP Notification Filters
■
Defining SNMP Notification Recipients
Defining SNMP Notification Global Parameters
The SNMP Notification Properties page contains parameters for defining SNMP notification
parameters.
To define SNMP notification global parameters:
1. Click SNMP > Trap Management > Properties. The SNMP Notification Properties page
opens:
SNMP Notification Properties
The SNMP Notification Properties page contains the following fields:
❏
Enable SNMP Notifications — Specifies whether the device can send SNMP
notifications. The possible field values are:
◆
Checked — Enables SNMP notifications.
◆
Unchecked — Disables SNMP notifications.
❏
Enable Authentication Notifications — Specifies whether SNMP authentication
failure notification is enabled on the device. The possible field values are:
◆
Checked — Enables the device to send authentication failure notifications.
◆
Unchecked — Disables the device from sending authentication failure notifications.
2. Define the Enable SNMP Notification and Enable Authentication Notifications fields.
3. Click
updated.
Embedded Web System User Guide
. The SNMP notification properties are defined, and the device is
www.hp.com
Configuring SNMP
1 1-1 1