HP BladeSystem bc2000 - Blade PC User Manual page 106

Defining IP Addresses
❏
Type — Displays the IP address type. The possible field values are:
◆
Dynamic — Indicates the IP address is dynamically created.
◆
Static — Indicates the IP address is a static IP address.
◆
DHCP — Indicates the IP address was retrieved using DCHP.
❏
Remove — Removes the DNS server entry.
❏
DNS Server — Displays the DNS server IP address. DNS servers are added in the Add
DNS Server field.
❏
Active Server — Specifies the DNS server that is currently active.
2. Select Enable DNS Status.
3. Define the Default Domain Name and Active Server fields.
4. Click
To add a new DNS server:
1. Click System > Domain Name System > DNS Server. The DNS Server page opens.
2. Click
Add DNS Server
3. Define the DNS Server, DNS Server Currently Active, and Set DNS Server Active fields.
4. Click
7-6
. The DNS server is enabled, and the device is updated.
. The Add DNS Server page opens:
. The DNS server is added, and the device is updated.
www.hp.com Embedded Web System User Guide