Defining Radius Settings - HP BladeSystem bc2000 - Blade PC User Manual

Configuring Device Security
3. Click
TACACS Host Settings
4. Define the Priority, Source IP Address, Key String, Authentication Port, Timeout for
Reply, and Single Connection fields.
5. Click

Defining RADIUS Settings

Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for
networks. RADIUS servers provide a centralized authentication method for web access. The
default parameters are user-defined, and are applied to newly defined RADIUS servers. If new
default parameters are not defined, the system default values are applied to newly defined
RADIUS servers.
To configure RADIUS servers:
1. Click Management Security > Authentication > RADIUS. The RADIUS page opens:
4-14
. The TACACS Host Settings page opens:
. The TACACS host settings are saved, and the device is updated.
www.hp.com Embedded Web System User Guide