Defining System Log Servers - HP BladeSystem bc2000 - Blade PC User Manual

Defining System Log Servers

The Servers page contains information for viewing and configuring the remote log servers. New
log servers can be defined, and the log severity can be sent to each server.
To define a system log server:
1. Click System > Logs > Servers. The Servers page opens:
Servers
The Servers page contains the following fields:
❏
Server — Specifies the server to which logs can be sent.
❏
UDP Port — Defines the UDP port to which the server logs are sent. The possible range
is 1 - 65535. The default value is 514.
❏
Facility — Defines an application from which system logs are sent to the remote server.
Only one facility can be assigned to a single server. If a second facility level is assigned,
the first facility is overridden. All applications defined for a device utilize the same
facility on a server. The field default is Local7. The possible field values are Local0 -
Local7.
❏
Description — A user-defined server description.
❏
Minimum Severity — Indicates the minimum severity from which logs are sent to the
server. For example, if Notice is selected, all logs with a severity level of Notice and
higher are sent to the remote server.
Embedded Web System User Guide www.hp.com
Configuring System Logs
5-5