Configuring Spanning Tree
This section contains the following topics:
■
Defining Classic Spanning Tree
■
Defining STP on Interfaces
■
Defining Rapid Spanning Tree
■
Defining Multiple Spanning Tree
Instance 0 is reserved for VLAN 4094 (default VLAN to drop all frames).
✎
When MSTP-to-RSTP is enabled (enabled by default), if you attempt to put any switch port into
trunk or general mode, you will receive the following error message: Port <Number>,
extension separated-bridge exist. Refer to paragraph one in this section for more detail.
9-2
www.hp.com
Embedded Web System User Guide