Defining Sntp Authentication - HP BladeSystem bc2000 - Blade PC User Manual

Configuring System Time

Defining SNTP Authentication

The SNTP Authentication page provides parameters for defining the means by which the SNTP
server is authenticated.
To define SNTP authentication:
1. Click System > Time > SNTP Authentication. The SNTP Authentication page opens:
SNTP Authentication
The SNTP Authentication page contains the following fields:
❏
Enable SNTP Authentication — Indicates if authenticating an SNTP session between
the device and an SNTP server is enabled on the device. The possible field values are:
◆
Checked — Authenticates SNTP sessions between the device and the SNTP server.
◆
Unchecked — Disables authenticating SNTP sessions between the device and the
SNTP server.
❏
Encryption Key ID — Indicates if the encryption key identification is used to
authenticate the SNTP server and the device. The field value is up to 4294967295.
❏
Authentication Key — Indicates the key used for authentication.
❏
Trusted Key — Indicates the encryption key used (Unicast/Anycast) or elected
(Broadcast) to authenticate the SNTP server.
2. Select the Enable SNTP Authentication field.
3. Click
3-8
. SNTP Authentication is defined, and the device is updated.
www.hp.com Embedded Web System User Guide