Defining Vlan Interface Settings - HP BladeSystem bc2000 - Blade PC User Manual

Configuring Interfaces
❏
Forbidden (Purple) — Denies the interface VLAN membership, even if GARP
indicates the port is to be added.
2. Select a VLAN in the VLAN ID field. The VLAN membership settings are displayed.
3. Define the fields.
4. Click
updated.

Defining VLAN Interface Settings

The VLAN Interface Settings page contains fields for managing ports that are part of a VLAN.
The Port Default VLAN ID (PVID) is configured on the VLAN Interface Settings page. All
untagged packets arriving at the device are tagged with the PVID.
To define VLAN interfaces:
1. Click Layer 2 > VLAN > Interface Settings. The VLAN Interface Settings page opens:
VLAN Interface Settings
The VLAN Interface Settings page contains the following fields:
❏
Ports — Displays VLAN interface settings for ports.
❏
LAGs — Displays the VLAN interface settings or LAGs.
❏
Interface — Displays the port number included in the VLAN.
❏
Interface VLAN Mode — Displays the port mode. The possible values are:
◆
General — Indicates the port belongs to VLANs, and each VLAN is user-defined as
tagged or untagged (full IEEE802.1q mode).
◆
Access — Indicates the port belongs to a single untagged VLAN. When a port is in
Access mode, the packet types which are accepted on the port cannot be designated.
Ingress filtering cannot be enabled or disabled on an access port.
6-14
. The VLAN membership settings are defined, and the device is
www.hp.com Embedded Web System User Guide