Configuring Snmp Security; Defining Snmp Security - HP BladeSystem bc2000 - Blade PC User Manual

Configuring SNMP

Configuring SNMP Security

This section contains information for configuring SNMP security parameters, and contains the
following topics:
■

Defining SNMP Security

■
Defining SNMP Views
■
Defining SNMP Group Profiles
■
Defining SNMP Group Membership
■
Defining SNMP Communities
Defining SNMP Security
The SNMP Security Global Parameters page permits the enabling of both SNMP and
Authentication notifications.
To define the SNMP security parameters:
1. Click SNMP > Security > Global Parameters. The SNMP Security Global Parameters
page opens:
SNMP Security Global Parameters
The SNMP Security Global Parameters page contains the following fields:
❏
Local Engine ID — Displays the local device Engine ID. The field value is a
hexadecimal string. Each byte in hexadecimal character strings is two hexadecimal
digits. Each byte can be separated by a period or a colon. The Engine ID must be defined
before SNMPv3 is enabled. Select a default Engine ID that is comprised of an Enterprise
number and the default MAC address.
❏
Use Default — Uses the device-generated Engine ID. The default Engine ID is based on
the device MAC address. The possible field values are:
◆
Checked — Indicates the default Engine ID is used.
◆
Unchecked — Indicates the custom Engine ID is used.
1 1-2 www.hp.com Embedded Web System User Guide