Lenovo ThinkServer RD330 Software User's Manual page 389

MegaRAID SAS Software User Guide
Table 136: Error Messages and Descriptions (Continued)
Number
0x3e CC scheduling is disabled
0x3f PD CopyBack operation is in progress
0x40 Selected more than one PD per array
0x41 Microcode update operation failed
0x42 Unable to process command as drive security feature is not
enabled
0x43 Controller already has a lock key
0x44 Lock key cannot be backed-up
0x45 Lock key backup cannot be verified
0x46 Lock key from backup failed verification
0x47 Rekey operation not allowed, unless controller already has a
lock key
0x48 Lock key is not valid, cannot authenticate
0x49 Lock key from escrow cannot be used
0x4a Lock key backup (pass-phrase) is required
0x4b Secure LD exist
0x4c LD secure operation is not allowed
0x4d Reprovisioning is not allowed
0x4e Drive security type (FDE or non-FDE) is not appropriate for
requested operation
0x4f LD encryption type is not supported
0x50 Cannot mix FDE and non-FDE drives in same array
0x51 Cannot mix secure and unsecured LD in same array
0x52 Secret key not allowed
0x53 Physical device errors were detected
0x54 Controller has LD cache pinned
0x55 Requested operation is already in progress
0x56 Another power state set operation is in progress
0x57 Power state of device is not correct
0x58 No PD is available for patrol read
0x59 Controller reset is required
0x5a No EKM boot agent detected
0x5b No space on the snapshot repository VD
0x5c For consistency SET PiTs, some PiT creations might fail and
some succeed
0xFF Invalid status - used for polling command completion
Appendix B: MegaCLI Error Messages
Event Text
|
Error Messages and Descriptions
Page 389