Lenovo ThinkServer RD330 Software User's Manual page 271

MegaRAID SAS Software User Guide
Figure 150: Span 0 and Span 1 of Drive Group 0
f. Click Create Drive Group to make a drive group with the spans.
g. Click Next to complete this step.
The Virtual drive settings window appears, as shown in Figure 151. The drive
group and the default virtual drive settings appear. The options to update the
virtual drive or remove the virtual drive are grayed out until you create the
virtual drive.
NOTE: The parameters in the Virtual drive settings window display in disabled mode
(grayed out) for SAS-Integrated RAID (IR) controllers because these parameters do not
apply to SAS-IR controllers.
|
Chapter 8: Configuration Creating a New Storage Configuration
Page 271