Importing Foreign Drives - Lenovo ThinkServer RD330 Software User's Manual

MegaRAID SAS Software User Guide
11.5.5

Importing Foreign Drives

Based on the application's response two scenarios occur,
Scenario #1, when EKM server is present
Scenario #2, when EKM server is not present
 Scenario # 1
EKM server is present.
If the EKM server is present, a confirmation message indicating that the drive security is
enabled on the controller as shown in
Figure 247: EKMS server is present
 Scenario # 2
EKM server is not present.
If the EKM server is not present, restart your system, and during re-boot, the boot agent
generates the security keys.
When you restart the system, the system restart message appears as shown in the
following figure.
Figure 248: System Restart
NOTE: If you select the Switch to Local key Management (LKM) mode in the Change
Security settings wizard in Figure 246, you can view the details of LKM in Enabling
Drive Security using LKM.
You can import the foreign drives in the LKM or EKM mode. Depending on the mode
selected and the secured drives, the following scenarios occur.
Chapter 11: Using MegaRAID® Advanced Software
Figure 247 is displayed.
|
SafeStore Encryption Services
Page 361