Cleaning Up A Snapshot Repository - Lenovo ThinkServer RD330 Software User's Manual

Chapter 4: WebBIOS Configuration Utility
4.10.8 Cleaning up a Snapshot
Repository
Page 152
|
Using MegaRAID Recovery
Figure 105: Advanced Operations Screen
4. Select a snapshot from the drop-down menu.
If the volume is still damaged, continue to select from the next most current PiT
snapshot to the oldest.
5. Click Go.
The system rolls back to the selected PiT snapshot and returns you to a snapshot
that does not have the malicious or corrupt files.
The clean up option can be performed only on a Snapshot Repository virtual drive.
Perform a cleanup if a Snapshot Base virtual drive goes offline and the Snapshot
Repository virtual drive is still connected to the system. After you perform the cleanup,
memory that was allocated to the offline base virtual drives will be available to the
Snapshot Repository virtual drive.
Follow these steps to clean up a Snapshot Repository.
1. Access the Virtual Drive screen by clicking on a Snapshot Repository virtual drive
icon in the right panel on the WebBIOS CU main screen.
The Virtual Drive screen appears, as shown in Figure 106.
MegaRAID SAS Software User Guide