Adding A Drive Or Drives To A Configuration - Lenovo ThinkServer RD330 Software User's Manual
Megaraid sas software user guide
Hide thumbs
Also See for ThinkServer RD330:
- Safety information manual (288 pages) ,
- Benutzerhandbuch (212 pages) ,
- Guía del usuario (202 pages)
Table of Contents
Advertisement
|
Chapter 8: Configuration
Changing a Virtual Drive Configuration
8.7.2
Adding a Drive or Drives to a
Configuration
Page 286
A warning to back up your data appears, as shown in Figure 169.
Figure 169: Warning to Back up Data
5. Select Confirm and click Yes.
The Modify Drive Group Wizard screen appears, as shown in Figure 170.
f
Figure 170: Modify Drive Group Wizard
The following sections explain the Modify Drive Group Wizard options.
CAUTION: Be sure to back up the data on the virtual drive before you add a drive to it.
Follow these steps to add a drive or drives to a configuration with the Modify Drive
Group Wizard.
1. Click the Logical tab in the left panel of the MegaRAID Storage Manager window.
2. Select a drive group in the left panel of the window.
MegaRAID SAS Software User Guide
Advertisement
Table of Contents
