Setting Alert Delivery Methods; Changing Alert Delivery Methods For Individual Events - Lenovo ThinkServer RD330 Software User's Manual

Chapter 9: Monitoring System Events and Storage Devices
9.2.1

Setting Alert Delivery Methods

9.2.2 Changing Alert Delivery
Methods for Individual Events
Page 298
|
Configuring Alert Notifications
 Send test messages to the recipient e-mail addresses.
 Remove e-mail addresses of recipients of alert notifications.
 Save an .xml backup file of the entire alert configuration.
 Load all of the values from a previously saved backup into the dialog to edit or send
to the monitor.
NOTE: When you load a saved backup file, all unsaved changes made in the current
session will be lost.
You can select the methods used to send alert deliveries, including by popup, e-mail,
system log, or MSM log. You can select the alert delivery methods for each event
severity level (Information, Warning, Critical and Fatal).
Perform the following steps to select the alert delivery methods:
1. On the Alerts Notification Configuration screen, click the Alerts Setting tab.
2. Under the Alerts Delivery Methods heading, select one of the severity levels.
3. Click Edit.
The Alert Notification Delivery Methods dialog box appears, as shown in Figure 181.
Figure 181: Alert Notification Delivery Methods Dialog Box
4. Select the desired alert delivery methods for alert notifications at the event severity
level.
5. Click OK to set the delivery methods used for the severity level that you selected.
You can change the alert delivery options for an event without changing the severity
level.
1. On the Alerts Notification Configuration screen, click the Alerts Setting tab.
The the Alerts Setting portion of the screen appears, as shown in Figure 180.
2. Click Change Individual Events.
The Change Individual Events dialog box appears, as shown in Figure 182. The
dialog box shows the events by their ID number, description, and severity level.
MegaRAID SAS Software User Guide