Delete Specified Virtual Drive(S); Display The Free Space; Virtual Drive-Related Options; Display Virtual Drive Information - Lenovo ThinkServer RD330 Software User's Manual

Chapter 5: MegaRAID Command Tool
5.13.8 Delete Specified Virtual
Drive(s)
5.13.9

Display the Free Space

5.14 Virtual Drive-Related
Options
5.14.1 Display Virtual Drive
Information
Page 198
|

Virtual Drive-Related Options

Use the command in the following table to delete one, multiple, or all virtual drives on
the selected controller(s).
Table 70: Delete Specified Virtual Drives
Convention
Description
Use the command in the following table to display the free space that is available to use
for configuration on the selected controller(s).
Table 71: Display Free Space
Convention
Description
You can use the commands in this section to select settings for the virtual drives and
perform actions on them.
Use the command in the following table to display virtual drive information for the
selected controller(s).
Table 72: Display Virtual Drive Information
Convention
Description
MegaCli –CfgLDDel –Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
Deletes the specified virtual drive(s) on the selected controller(s). You can
delete one virtual drive, multiple virtual drives, or all of the selected virtual
drives on selected controller(s).
MegaCli –CfgFreeSpaceInfo -aN|-a0,1,2|-aALL
Displays all of the free space available for configuration on the selected
controller(s). The information displayed includes the number of drive
groups, the number of spans in each drive group, the number of free space
slots in each drive group, the start block, and the size (in both blocks and
megabytes) of each free space slot.
MegaCli –LDInfo –Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL
Displays information about the virtual drive(s) on the selected controller(s).
This information includes the name, RAID level, RAID level qualifier, capacity
in megabytes, state, stripe size, number of drives, span depth, cache policy,
access policy, and ongoing activity progress, if any, including initialization,
background initialization, consistency check, and reconstruction.
MegaRAID SAS Software User Guide