Manage A Drive Initialization; Rebuild A Drive - Lenovo ThinkServer RD330 Software User's Manual
Megaraid sas software user guide
Hide thumbs
Also See for ThinkServer RD330:
- Safety information manual (288 pages) ,
- Benutzerhandbuch (212 pages) ,
- Guía del usuario (202 pages)
Table of Contents
Advertisement
Chapter 5: MegaRAID Command Tool
5.15.6
Manage a Drive Initialization
5.15.7
Rebuild a Drive
Page 206
|
Drive-Related Options
Use the command in the following table to manage a drive initialization on the
selected controller(s).
Table 91: Drive Initialization
Convention
Description
Use the command in the following table to start or stop a rebuild on a drive and display
the rebuild progress. When a drive in a RAID drive group fails, you can rebuild the drive
by recreating the data that was stored on the drive before it failed.
Table 92: Rebuild a Drive
Convention
Description
MegaCli –PDClear -Start |-Stop|-ShowProg |-ProgDsply
-PhysDrv[E0:S0,E1:S1....] -aN|-a0,1,2|-aALL
Manages initialization or displays initialization progress on a single
controller, multiple controllers, or all controllers:
-Start: Starts initialization on the selected drive(s).
-Stop: Stops an ongoing initialization on the selected drive(s).
-ShowProg: Displays the current progress percentage and time remaining
for the initialization. This option is useful for running the application through
scripts.
-ProgDsply: Displays the ongoing clear progress. The routine continues
to display the initialization progress until at least one initialization is
completed or a key is pressed.
MegaCli –PDRbld –Start |-Stop|-ShowProg |-ProgDsply
–PhysDrv [E0:S0,E1:S1....] -aN|-a0,1,2|-aALL
Manages a drive rebuild or displays the rebuild progress on a single
controller, multiple controllers, or all controllers. Note that the drive must
meet the capacity requirements before it can be rebuilt, and it must be part
of a drive group:
-Start: Starts a rebuild on the selected drive(s) and displays the rebuild
progress (optional).
-Stop: Stops an ongoing rebuild on the selected drive(s).
-ShowProg: Displays the current progress percentage and time remaining
for the rebuild. This option is useful for running the application through
scripts.
-ProgDsply: Displays the ongoing rebuild progress. This routine displays
the rebuild progress until at least one initialization is completed or a key is
pressed.
-Physdrv[E0:S0,...]: Specifies the physical drive enclosure and the
slots for the drives.
MegaRAID SAS Software User Guide
Advertisement
Table of Contents
