Selecting And Creating Custom Colors; Edit Watermark; Delete Watermark - Kyocera FS-C5100DN User Manual

Advanced
1
2
3
4
5
6
7
1
2
3
4
1
2
3
8-7
User defined: Select to change the angle from the default value. Type the number
for the angle you want. An angle is measured in degrees, ranging from 0 to 360.

Selecting and Creating Custom Colors

To use a predefined color for the watermark text, select one from the Color list.
For more colors, select Custom at the bottom of the list. Click the button to open the
Color dialog box.
Click one of the Basic colors and click OK, or click Define Custom Colors to open
the color spectrum panel.
In the color spectrum, click and drag the pointer to different areas of the spectrum to
adjust the hue and saturation levels. The corresponding numeric values appear in
the Hue, Sat, and RGB (Red, Green, Blue) text boxes. Click and drag the slider at
the right side of the color spectrum to adjust the luminosity (relative lightness or
darkness) of a color. The corresponding numeric value appears in the Lum and RGB
text boxes.
You can also create a specific color by typing numbers in the Hue, Sat, Lum or RGB
text boxes.
Click Add to Custom Colors to save the new color to the Custom colors at the
bottom left of the Color dialog box.
Click OK to save any new custom colors and close the Color dialog box. To close
the dialog box without saving any new colors, click Cancel.

Edit Watermark

The Edit Watermark feature lets you select an existing watermark and make
changes to its appearance and properties. For standard watermarks, the Watermark
name and Watermark text cannot be changed.
From the Select watermark list, select a watermark to edit.
Click Edit to open the Edit Watermark dialog box.
Make any adjustments you want to the watermark. For more information about
changing watermark properties, see
When you are finished editing, click OK to save any changes you made to the
watermark. To exit the dialog box without saving the changes, click Cancel.

Delete Watermark

The Delete feature lets you delete custom watermarks that were added. The
standard watermarks cannot be deleted.
From the Select watermark list, select a watermark to delete.
Click Delete.
In the message box, click Yes to confirm the deletion. To refuse the deletion, click
No.
Add Watermark on page 8-5.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
KX Driver