Color Page Count; Monochrome Mode; Administrator Password - Kyocera FS-C5100DN User Manual

Printer Properties
1
2
1
2
2-7
Select from DES (Data Encryption Standard), or AES (Advanced Encryption
Standard) for encryption applied to SNMP communication. Privacy is
available only appears when Authentication is selected.
• Apply to other models
You can apply the selected SNMP option, SNMPv1/v2c or SNMPv3 to other
installed printing devices by clicking Apply to other models.
Click Select and choose from the Installed Printer or Fax Model List that
appears. Make your selection, and click OK.

Color Page Count

Color page count automatically tallies the number of color and monochrome pages
in each print job. This feature is used by billing or accounting applications to track
cost differences between pages printed with black toner only, and more expensive
color pages. Optional third party accounting software can read and process the print
information embedded in each page. Embedded information does not affect the
appearance of printed documents. Select Color page count to enable this feature.
For accounting purposes:
• A page with any color is counted as a color page.
• A page with black only is counted as a monochrome page.
• A blank page is counted as a monochrome page.

Monochrome Mode

Monochrome mode disables all color settings in the driver's Imaging tab and prints
with black toner only.
To use monochrome mode in the Device Settings tab, click Administrator >
Monochrome mode.

Administrator Password

You can set a password for the Administrator Settings dialog box. After a password
is typed in, the Administrator settings dialog box cannot be opened until the
password is typed in the Enter Password dialog box. This prevents unauthorized
personnel from changing the administrator settings.
Set the Password
In the Administrator Settings dialog box, select the Password protect
administrator settings check box to open the Password dialog box.
In the Password dialog box, enter the new password using between 4 and 16
characters in the Password text box. Re-enter the password in Confirm password
and click OK.
Clear the Password
In the Device Settings tab, click Administrator.
The Enter Password dialog box appears. Type the password and click OK.
1
2
1
2
KX Driver