Windows Vista - Usb - Kyocera FS-C5100DN User Manual

Installation
8
9
1
2
3
4
5
6
7
1-5
On the Confirm Settings page, click Install if the settings are correct. Click Back to
correct the settings.
The Installation Completed page appears showing the installation details.
• Select Device Settings to open the Device Settings tab where you can choose
installed options for your printing system.
• Select Enable Status Monitor to display system status messages on your
computer screen during printing tasks. For more information, see
on page 2-13.
• Select Print a test page to verify a connection with the printer and create a print
out of the installed driver components.
When the installation completes successfully, click Finish to exit the Printer
Installation Wizard and return to the CD-ROM main menu.
For software installation failures, a message box appears, One or more software
installations have failed. See the details below. Click Finish and retry the installation.
If the same message appears again, contact your system administrator.
The installation of the printer is now complete. If prompted, restart your system.

Windows Vista - USB

Ensure that your printing system is connected using a Universal Serial Bus (USB)
cable.
On the Custom Installation page, ensure that the KX Driver is selected as the
product. To install fonts or utilities, click the Utility tab, and select from the options
there. When you are finished selecting items for installation, click Next.
The Discover Printing System page appears.
Select your printing system from the list, which displays a Type of USB for a USB
cable. Click Next, then go to
If Discovery does not find your printing system, a message box appears. Ensure that
your printer is properly connected by the correct cable and is powered on, and then
close the message box and retry Discovery. You also have the choice to manually
select your printing system and port by selecting Custom select, and then clicking
Next.
On the Printer Port page, select the port connected to your printing system. For a
USB connection, the Port Name should begin with USB, and the Description should
read Virtual printer port for USB.
Click Next.
The Printing System page appears. From the list, select the printing system to
install, and then click Next.
On the Confirm Settings page, click Install if the settings are correct. Click the back
arrow to correct the settings.
The Installation Completed page appears showing the installation details.
• Select Enable Status Monitor to display system status messages on your
computer screen during printing tasks. For more information, see
on page 2-13.
step 6.
Windows Vista - USB
8
Status Monitor
1
2
3
4
5
6
Status Monitor
KX Driver