Administrator Settings; Job Accounting - Kyocera FS-C5100DN User Manual

Printer Properties

Administrator Settings

2-5
The following settings can be specified by selecting Administrator in the Device
Settings tab.
•

Job Accounting

• SNMP
• Color Page Count
• Monochrome Mode
• Administrator Password
Job Accounting
With Job accounting, you can assign account IDs to print jobs, or work with IDs
already created at the printing system. Job accounting features help you manage
and control the number of copies in a printing system. Account IDs for newer models
must be 8 digits or less.
A maximum of 100 account IDs can be assigned at the printing system and stored in
the printer driver. For complete information about the job accounting features of the
printing system, please see the Operation Guide for your particular model.
Job accounting includes the following options:
Use specific account ID: This option can be used to specify a single account ID to
manage the print jobs of a specific user. When the user prints, your jobs are sent with
the account ID. You can use Password protect administrator settings to protect
access to the Administrator Settings dialog box, so that the user cannot see or
change this setting.
Prompt for account ID: This option can be used to prompt the user for an account
ID when printing. When sending a print job, type an account ID when prompted, then
click OK to print. The account ID must be one that has been registered at the printing
system, or the job does not print.
Prompt for account ID and validate: This option can be used to prompt the user
to specify an account ID that is saved in the driver. When sending a print job, type an
account ID when prompted, then click OK to print. The account ID is validated
against the account ID list, so you must type an ID from the list, or you cannot print.
KX Driver