Elan V883 Installation Manual page 13

Elan home systems video controller installation manual v883 v series
Hide thumbs Also See for V883:
Table of Contents

Advertisement

E L A N H O M E S Y S T E M S
DIP Switch Settings - BAUD RATE
Set the BAUD RATE DIP switch to the 9600 position (Up) when utilizing RS-232 con-
trollers that require this baud rate. Use the 19.2k (Down) position for ELAN RS-232
applications and third party controllers that operate at 19.2k.
UNIT ID
UNIT 1
UNIT 2
UNIT 3
UNIT 4
1 2 3
9.6K BAUD
75 Ohm Termination DIP Switch Settings
There are eight 75 Ohm Termination DIP Switches used to optimize video signals
when sharing sources with other devices or using multiple V883s. For each input
that is shared using a 'Y' cable, place the corresponding DIP switch in the OFF/
DOWN position. When not sharing a source, the DIP switch should remain in the
factory default ON/UP position.
Not Shared
Source
ON/UP
(Factory Default)
© ELAN Home Systems 2006 • All rights reserved.
UNIT ID
UNIT 1
UNIT 2
UNIT 3
UNIT 4
1 2 3
19.2K BAUD
(Factory Default)
Shared
Source
75 OHM
INPUT
TERM
OFF/DOWN
V883
INSTALLATION MANUAL
Page 11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents