Ptn4 Pattern Quantization & Management - Yamaha DTX-MULTI Owner's Manual

PATTERN Setting Area (PTN)
Chorus Send page
PTN3-6
PTN3-6≥≥≥≥≥≥Ch≥1
≥≥ChoSend=≥≥0
1 MIDI channel (Ch)
Settings 1 to 16
B Chorus send level (ChoSend)
Use this parameter to set the chorus-send level to be sent by
the currently selected pattern.
Settings 0 to 127
NOTE
• If "off" or "PC" has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as "---" and modification will not be possi-
ble.
• If you change the chorus send level for MIDI channel 10, the setting on
the Chorus Send page (KIT3-1) for the currently selected kit will also
change to this new setting.
Reverb Send page
PTN3-7
PTN3-7≥≥≥≥≥≥Ch≥1
≥≥RevSend=≥40
1 MIDI channel (Ch)
Settings 1 to 16
B Reverb send level (RevSend)
Use this parameter to set the reverb-send level to be sent by
the currently selected pattern.
Settings 0 to 127
NOTE
• If "off" or "PC" has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as "---" and modification will not be possi-
ble.
• If you change the reverb send level for MIDI channel 10, the setting on
the Reverb Send page (KIT3-2) for the currently selected kit will also
change to this new setting.
78
Owner's Manual
PTN4 JOB
Pattern Quantization & Management
1
2
In the JOB section, you can quantize the currently selected User
pattern, import SMF files, and perform other related tasks. With
the JOB page (PTN4) displayed, press the [ENTER] button to
access its seven parameter-setting pages (PTN4-1 to PTN4-7).
You can use the [
pages.
NOTE
• This section can be used only with User patterns. If a Preset pattern has
been selected, the [ENTER] button will not open a parameter-setting page.
PTN4-1
From the Quantize Pattern page, you can correct irregularities in
the timing of notes making up the currently selected User pattern.
This is referred to as quantizing. With the Quantize page dis-
played, press the [ENTER] button to open the Quantize Pattern
Setting page.
1
2
PTN4-1-1
1 Quantize
Use this parameter to specify the quantizing resolution as a
division of a whole note. The lower the resolution, the finer
the correction of timing.
Settings
• The natural groove of a recorded performance may be lost as a
result of quantization. Note that once a pattern is quantized, it will
not be possible to reverse the procedure.
PTN4
≥≥≥≥≥≥JOB
B C
]/[ ] buttons to navigate between these
Quantize Pattern page
PTN4-1≥≥≥≥≥<JOB>
≥≥≥≥Quantize
Quantize Pattern Setting page
PTN4-1-1
≥≥Quantize=ƒ
When time signature from PTN1 or for
recording is 3/8, 6/8, 9/8, 12/8, or 15/8:
˙3 th
16
˙ th
16
©3 th
8
© th
8
ƒ th
4
¨
Dotted 4
When time signature from PTN1 is other
than the above:
˙3 th
16
˙ th
16
©3 th
8
© th
8
ƒ3 th
4
ƒ th
4
CAUTION
1
note triplets
notes
note triplets
notes
notes
th
notes
note triplets
notes
note triplets
notes
note triplets
notes