Midi3 Other Midi Settings; Midi3-1 Transmit Page; Midi3-2 Volume Page; Midi3-3 Pan Page - Yamaha DTX-MULTI Owner's Manual

Electronic percussion pad
Hide thumbs Also See for DTX-MULTI:
Table of Contents

Advertisement

MIDI3 OTHER
Other MIDI Settings
MIDI3
≥≥≥≥≥OTHER
In the OTHER section, you can set various MIDI messages to be
sent whenever the current kit is selected. With the OTHER page
(MIDI3) displayed, press the [ENTER] button to access its eight
parameter-setting pages (MIDI3-1 through MIDI3-8). You can
use the [B]/[C] buttons to navigate between these pages.
Transmit page
MIDI3-1
MIDI3-1≥≥≥≥≥Ch≥1
≥≥Transmit=all
1
MIDI channel (Ch)
Use this parameter to select the MIDI channel (1 to 16) to be
set.
Settings
1 to 16
B
Transmit
Use this parameter to indicate which MIDI messages are to be
sent whenever the current kit is selected.
• off ............. No MIDI messages will be sent.
• all ............. All applicable MIDI messages will be sent. (See
the following parameter-setting page descrip-
tions for more details.)
• PC............. Only program change messages and bank-select
MSB/LSB messages will be sent.
Settings
off, all, or PC
Volume page
MIDI3-2
MIDI3-2≥≥≥≥≥Ch≥1
≥≥≥Volume=100
1
MIDI channel (Ch)
Settings
1 to 16
B
Volume
Use this parameter to set a volume value to be sent whenever
the current kit is selected.
Settings
0 to 127
NOTE
• If "off" or "PC" has been selected on the Transmit page (MIDI3-1), this
setting will be displayed as "---" and modification will not be possible.
MIDI3-3
1
MIDI channel (Ch)
Settings
B
Pan
Use this parameter to set the pan value to be sent whenever
the current kit is selected.
Settings
NOTE
• If "off" or "PC" has been selected on the Transmit page (MIDI3-1), this
setting will be displayed as "---" and modification will not be possible.
1
MIDI3-4
2
1
MIDI channel (Ch)
Settings
B
Bank select MSB (M)
Use this parameter to set a bank-select MSB value to be sent
whenever the current kit is selected.
Settings
C
Bank select LSB (L)
Use this parameter to set a bank-select LSB value to be sent
whenever the current kit is selected.
Settings
D
Program change (PC)
Use this parameter to set a program-change number to be sent
whenever the current kit is selected.
1
Settings
2
NOTE
• If "off" has been selected on the Transmit page (MIDI3-1), these set-
tings will be displayed as "---" and modification will not be possible.
Pan page
MIDI3-3≥≥≥≥≥Ch≥1
≥≥≥≥Pan=≥C
1 to 16
L63 to C to R63
Program Change page
MIDI3-4≥≥≥≥≥Ch≥1
M000/L000/PC001
2
3
4
1 to 16
000 to 127
000 to 127
001 to 128
MIDI Setting Area (MIDI)
1
2
1
67
Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtx-multi 12

Table of Contents