Yamaha DTX-MULTI Owner's Manual page 54

KIT Setting Area (KIT)
Exchange Kits page
KIT8-3
From the Exchange Kits page, you can swap settings for a pair of
User kits. With this page displayed, press the [ENTER] button to
open the Exchange Kits Settings page.
KIT8-3≥≥≥≥≥<JOB>
≥≥Exchange≥Kit
Exchange Kits Settings page
KIT8-3-1
KIT8-3-1≥<Exchg>
≥≥U001≥åß≥U002
1
1 Exchange kit 1
B Exchange kit 2
Use these parameters to select the two drum kits whose set-
tings are to be swapped.
Settings U001 to U200
NOTE
• Only those settings already stored will be swapped. In addition, if drum
kits are swapped without first storing any modified settings, the
swapped settings will be overwritten with the modified settings when
the drum kit is subsequently stored.
Initialize Pad page
KIT8-4
From the Initialize Pad page, you can initialize individual pads
from the currently selected drum kit. With this page displayed,
press the [ENTER] button to open the Initialize Pad Setting page.
KIT8-4≥≥≥≥≥<JOB>
≥Initialize≥Pad
Initialize Pad Setting page
KIT8-4-1
KIT8-4-1≥
≥≥InitPad=¡£Ω¡
1 Pad number
Use this parameter to select the pad to be initialized.
01 to 12, 13, 13R1, 13R2, 14 to 17, FTSW,
Settings
HHCL, or HHSP
Once you have selected a pad, press the [ENTER] button, and
when asked to confirm that you wish to proceed, press the
[ENTER] button once again.
54
Owner's Manual
2
1
Initialize Kit page
KIT8-5
From the Initialize Kit page, you can initialize the drum kit cur-
rently being edited. With the Initialize Kit page displayed, press
the [ENTER] button, and when asked to confirm that you wish to
proceed, press the [ENTER] button once again.
KIT8-5≥≥≥≥≥<JOB>
≥Initialize≥Kit
CAUTION
• When a kit is initialized, all of its parameters will be returned to their
default settings. If you would like to save a copy of the kit before ini-
tialization, perform a Store operation as described on
store the currently selected drum kit as a different User kit.
to
page 45