Kit5 Chorus Effect Setup - Yamaha DTX-MULTI Owner's Manual

Variation Return page
KIT4-2
KIT4-2≥≥≥≥≥<VAR>
≥VarReturn=≥64
1 Variation return (VarReturn)
Use this parameter to set the level of the return signal from the
variation effect.
Settings 0 to 127
Variation Pan page
KIT4-3
KIT4-3≥≥≥≥≥<VAR>
≥≥≥VarPan=≥C
1 Variation pan (VarPan)
Use this parameter to set the stereo panning of the variation
effect's return signal.
Settings L63 to C to R63
Variation to Reverb page
KIT4-4
KIT4-4≥≥≥≥≥<VAR>
≥≥VarToRev=≥≥0
1 Variation to reverb (VarToRev)
Use this parameter to set the degree to which the output from
the variation effect is sent to the reverb effect.
Settings 0 to 127
Variation to Chorus page
KIT4-5
KIT4-5≥≥≥≥≥<VAR>
≥≥VarToCho=≥≥0
1 Variation to chorus (VarToCho)
Use this parameter to set the degree to which the output from
the variation effect is sent to the chorus effect.
Settings 0 to 127
KIT5 CHORUS
Chorus Effect Setup
1
In the CHORUS section, you can select a chorus effect and con-
figure it in a range of different ways. Chorus effects are applied to
all voices (on all MIDI channels). With the CHORUS page
(KIT5) displayed, press the [ENTER] button to access its four
parameter-setting pages (KIT5-1 to KIT5-4). You can use the
[B]/[C] buttons to navigate between these pages.
KIT5-1
1
1 Chorus type
Use this parameter to select a chorus-effect type.
Settings
With a chorus type selected, you can press the [ENTER] button
on the Chorus Type page (KIT5-1) to access a range of setting
pages allowing each of its parameters to be set. (The number of
parameter-setting pages depends on the type selected.) Use the
[B]/[C] buttons to navigate between these pages.
1
KIT5-1-1
1 Effect parameter
Each parameter setting page contains a different parameter for
the selected chorus type.
Settings
1
KIT5-2
1 Chorus return (ChoReturn)
Use this parameter to set the level of the return signal from the
chorus effect.
Settings
KIT5
≥≥≥≥≥CHORUS
Chorus Type page
KIT5-1≥≥ChoType=
G≥Chorus
Refer to the separate Data List booklet.
Parameter setting page (example)
KIT5-1-1≥≥≥<CHO>
LFOSpeed=0.000Hz
Refer to the separate Data List booklet.
Chorus Return page
KIT5-2≥≥≥≥≥<CHO>
≥ChoReturn=≥64
0 to 127
KIT Setting Area (KIT)
1
1
1
49
Owner's Manual