Wave4 Wave Memory Status - Yamaha DTX-MULTI Owner's Manual

Normalize page
WAVE3-2
From the Normalize page, you can increase the volume of the cur-
rently selected wave. With this page displayed, press the
[ENTER] button to open the Ratio page (WAVE3-2-1). Here you
can specify how much the volume of the wave is to be increased.
WAVE3-2≥≥≥≥<JOB>
≥≥≥Normalize
Ratio page
WAVE3-2-1
WAVE3-2-1
≥≥≥Ratio=100%
1 Ratio
Use this parameter to specify how much the wave's volume is
to be increased. Generally, a ratio of 100% or lower is used.
With a setting of 100%, the volume will be increased to the
maximum possible level without clipping. (Ratios greater
than 100% can be specified; however, the wave may become
distorted as a result.)
Settings 1 to 800
Delete page
WAVE3-3
From the Delete page, you can delete the wave currently selected
on the Select Wave page (WAVE1).
WAVE3-3≥≥≥≥<JOB>
≥≥≥≥≥Delete
Press the [ENTER] button with the Delete page displayed, and
when asked to confirm that you wish to proceed, press the
[ENTER] button once again.
Delete All page
WAVE3-4
From the Delete All page, you can delete all waves from the
DTX-MULTI 12's internal wave memory.
WAVE3-4≥≥≥≥<JOB>
≥≥≥Delete≥All
Press the [ENTER] button with the Delete All page displayed, and
when asked to confirm that you wish to proceed, press the
[ENTER] button once again.
WAVE3-5
From the Optimize Memory page, you can maximize the amount
of unused wave memory. In order to do this, the content of the
DTX-MULTI 12's internal wave memory is rearranged to make
more memory available. Optimization can be an effective way to
increase the amount of memory available for waves.
WAVE4 MEMORY INFO
Wave Memory Status
1
The MEMORY INFO section allows you to display the current
usage status of the DTX-MULTI 12's wave memory. To view the
memory-usage status, navigate to the MEMORY INFO section
(WAVE4) and press the [ENTER] button.
WAVE4-1
1 Memory usage ratio (%)
This indicates how much of the total wave memory is cur-
rently being used in percentage format.
B Used memory / Total memory
This indicates separately the amount of wave memory used
and the total wave memory in megabyte (MB) units.
NOTE
• Certain types of audio file may require more of the instrument's mem-
ory than indicated by the corresponding file size shown on your com-
puter.
WAVE Setting Area (WAVE)
Optimize Memory page
WAVE3-5≥≥≥≥<JOB>
Optimize≥Memory
WAVE4
≥≥MEMORY≥INFO
Memory Info page
WAVE4-1≥≥≥≥≥0.0%
≥≥0.4MB≥/≥64.0MB
1
2
73
Owner's Manual