Yamaha DTX-MULTI Owner's Manual page 77

MIDI Volume page
PTN3-2
PTN3-2≥≥≥≥≥≥Ch≥1
≥≥≥Volume=100
1 MIDI channel (Ch)
Settings 1 to 16
B Volume
Use this parameter to set the MIDI volume (Control Change
7) sent by the currently selected pattern on the MIDI channel
indicated by 1. In terms of the internal tone generator, this
value affects all voices played on that channel.
Settings 0 to 127
NOTE
• If "off" or "PC" has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as "---" and modification will not be possi-
ble.
• If you change the volume setting for MIDI channel 10, the setting on
the Kit Volume page (KIT2-1) will also change to this new setting.
MIDI Pan page
PTN3-3
PTN3-3≥≥≥≥≥≥Ch≥1
≥≥≥≥Pan=≥C
1 MIDI channel (Ch)
Settings 1 to 16
B Pan
Use this parameter to set the stereo panning (Control Change
10) sent by the currently selected pattern on the MIDI channel
indicated by 1. In terms of the internal tone generator, this
value affects all voices played on that channel.
Settings L64 to C to R63
NOTE
• If "off" or "PC" has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as "---" and modification will not be possi-
ble.
PTN3-4
1
2
1 MIDI channel (Ch)
Settings
B Bank select MSB (M)
Use this parameter to set a bank-select MSB value.
Settings
C Bank select LSB (L)
Use this parameter to set a bank-select LSB value.
Settings
D Program change (PC)
Use this parameter to set a program-change number sent by
the currently selected pattern on the MIDI channel indicated
by 1.
Settings
NOTE
• If "off" has been selected on the MIDI Transmit page (PTN3-1), this
setting will be displayed as "---" and modification will not be possible.
1
To select a DTX-MULTI 12 drum kit, set parameters for
2
MIDI channel 10 as follows.
• Preset kits:
MSB = 125, LSB = 000, PC = Preset kit number
• User kits between U001 and U100:
MSB = 125, LSB = 001, PC = 001 to 100
• User kits between U101 and U200:
MSB = 125, LSB = 002, PC = 001 to 100
If a program-change setting is made for MIDI channel 10, the
current drum kit will be changed immediately.
PTN3-5
1 MIDI channel (Ch)
Settings
B Variation send level (Var)
Use this parameter to set the variation-send level to be sent by
the currently selected pattern.
Settings
NOTE
• If "off" or "PC" has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as "---" and modification will not be possi-
ble.
• If MIDI channel 10 is selected, this setting will be displayed as "---" and
modification will not be possible.
PATTERN Setting Area (PTN)
Bank Select page
PTN3-4≥≥≥≥≥≥Ch≥1
M000/L000/PC001
2 3
4
1 to 16
000 to 127
000 to 127
001 to 128
Variation Send page
PTN3-5≥≥≥≥≥≥Ch≥1
Var=≥≥0(Dry=127)
1 to 16
0 to 127
1
1
2
77
Owner's Manual