Yamaha DTX-MULTI Owner's Manual page 30

Internal Design
● Adjusting volume and other parameters using an
HH65
[Function]
In the same way as with an FC7 Foot Controller, you can
adjust volume and a wide range of MIDI Control Change
values by adjusting the degree by which an HH65 Hi-hat
Controller is operated.
[Setup]
• With the DTX-MULTI 12 turned off, connect the HH65 Hi-
hat Controller via the FOOT SW jack.
• Turn on the DTX-MULTI 12.
• On the Foot Switch Input page (UTIL4-2), set FootSwIn-
Sel to "HH65". (See page 89.)
• On the Pad Function page (UTIL4-1), select
then set Func to the MIDI Control Change message
("CC01" to "CC95") that you want to control. (See page
88.)
■ Using Acoustic Drums to Produce Trigger
Signals
Optional drum triggers, such as the DT10 or DT20, can be
used to convert performances on acoustic drums into trig-
ger signals and to input these signals into the instrument.
You can even apply drum triggers to training pads in order
to produce trigger signals.
■ Trigger Setups
Settings for all of the parameters associated with pad sensi-
tivity are collectively referred to as a "trigger setup". In
addition to the actual sensitivity of the pad when it is
struck, a trigger setup can also include parameter settings
intended to prevent a pair of trigger signals being produced
in response to a single strike (i.e., double triggering) and
unwanted trigger signals being produced by pads other
than the one that was struck (i.e., crosstalk). The DTX-
MULTI 12 supports many different playing styles using
sticks and hands, and by selecting the most appropriate
trigger setup for the style being used, you can ensure that
trigger signals will be correctly processed. Trigger setups
can also be adjusted in order to ensure that trigger signals
from external pads and controllers are processed in an ideal
manner.
Your DTX-MULTI 12 comes pre-loaded with five Preset
trigger setups suitable for many different needs, and you
can also create up to ten unique User trigger setups to suit
your own individual requirements.
30
Owner's Manual
■ Using Optional Pads & Drum Triggers with
the PAD Jacks
Whenever you are using separately-sold pads and/or drum
triggers, the types of trigger signal handled will depend on
which of the PAD jacks is used for connection. The follow-
ing table shows how optional pads and drum triggers will
operate when connected via the various PAD jacks on the
rear panel.
PAD M: Suitable for use with two-zone and three-zone pads. Not
suitable for pad controllers.
HH65
PAD N/O, PAD P/Q: Not suitable for two-zone pads, three-
zone pads, or pad controllers.
TP65
TP65S
√¤''
and
TP100
TP120SD
RHH130
RHH135
PCY65
PCY65S
PCY130
PCY130S
PCY130SC
PCY135
PCY150S
PCY155
KP65
KP125
DT10
DT20
A: Operates as a three-zone pad.
If using a compatible product from the TP series, voices assigned to
each of the two rim sections and the head section can be played. If
using a compatible product from the PCY series, voices assigned to
each of the bow, edge, and cup sections can be played.
B: Operates as a two-zone pad.
If using a compatible product from the RHH series, voices assigned
to each of the bow and edge sections can be played. If using a com-
patible product from the PCY series, voices assigned to each of the
bow and edge sections can be played.
C: Operates as a monoaural pad.
NOTE
• For the most up-to-date information on support for optional pads and drum
triggers, visit the following web page.
http://dtxdrums.yamaha.com
Model Product name
Drum Pad
Drum Pad
Drum Pad
Snare Pad
Hi-hat Pad
Hi-hat Pad
Cymbal Pad
Cymbal Pad
Cymbal Pad
Cymbal Pad
Cymbal Pad
Cymbal Pad
Cymbal Pad
Cymbal Pad
Kick Pad
Kick Pad
Drum Trigger
Drum Trigger
Input (PAD jacks)
N/O
PAD
M
PAD
P/Q
PAD
C C
A C
A C
B C
B C
B C
C C
B C
C C
B C
A C
A C
A C
A C
C C
C C
C C
C C