Turning On The Dtx-Multi 12; Connecting A Usb Memory Device - Yamaha DTX-MULTI Owner's Manual

Turning on the DTX-MULTI 12

1
After you have connected speakers, an audio
player, and any other necessary equipment, turn
the volume of the DTX-MULTI 12 itself and the
other devices fully down as a precaution.
2 F F
Press the F F (Standby/On) switch on the DTX-
MULTI 12's rear panel to turn it on.
The opening screen will be displayed, followed by the Select
Kit page (from the KIT setting area).
≥≥≥≥≥YAMAHA
<<DTX-MULTI≥12>>
■
Connecting a mixer or other MIDI
devices
Ensure that the volume on all devices is turned fully down. Then,
turn on the devices one-by-one in the following sequence: q
MIDI controllers (master devices), w MIDI receivers (slave
devices), e audio equipment (mixers, amplifiers, speakers, etc.).
NOTE
• When turning off your system, first turn the volume of each audio device
fully down, and then switch off the devices one-by-one in the reverse order
to above (i.e., starting with the audio equipment).

Connecting a USB Memory Device

You can plug a USB memory device into the USB TO DEVICE
port on the side panel of your DTX-MULTI 12.
USB memory
device
or
Connection to USB
memory device
(hard disk, etc.)
■
Whenever connecting a USB device via the USB TO DEVICE
port, be sure to handle it with care and to observe the following
important precautions.
NOTE
• For more details on how to use your USB device, refer to the owner's man-
ual that came with it.
●
Flash drives, external hard disks, and other USB-compatible,
mass-storage devices may be plugged in for use with this instru-
ment.
The DTX-MULTI 12 does not necessarily support all commer-
cially available USB memory devices, and Yamaha cannot guar-
antee the operation of all such devices that can be purchased.
Before purchasing a USB device for use with this instrument,
therefore, please check with your Yamaha dealer or an authorized
Yamaha distributor (see list at end of the Owner's Manual) or visit
the following web page:
NOTE
• Other USB devices, such as a computer keyboard or mouse, cannot be
used.
●
Before plugging in a USB memory device, ensure that its connec-
tor matches the instrument's USB TO DEVICE port and that both
are oriented in the same direction.
This port supports the USB 1.1 standard; however, you can also
plug in and use USB 2.0 memory devices. It should be noted that
data will be transferred at the USB 1.1 speed in such a case.
■
With a USB memory device plugged in, you will be able to save
data that you have created and to import both settings and audio
data.
NOTE
• Although USB-type CD-R and CD-RW drives can be used to load data into
the instrument, they cannot be used to save data directly. You can, how-
ever, transfer data to a computer featuring a CD-R or CD-RW drive in order
to write it to this type of media.
●
Certain types of USB memory device must be formatted before
they can be used with this instrument. For details on how to do
this, see page 97.
DTX-MULTI 12
• When a USB memory device is formatted, all data stored on it will
Precautions When Using USB TO
DEVICE Port
Supported USB devices
http://dtxdrums.yamaha.com
Connecting a USB memory device
Using a USB Memory Device
Formatting USB Memory Devices
CAUTION
be permanently erased. Before formatting such a device, therefore,
ensure that any important data contained on it has been copied to
another location.
Setting Up
11
Owner's Manual