Yamaha DTX-MULTI Owner's Manual page 26

Importing Audio Files
8
Press the [KIT] button to return to the KIT
setting area.
9
Press the [STORE] button and store the
current kit and its new wave assignment as
a User kit.
As shown here, select an empty User kit using the [-/
DEC] and [+/INC] buttons, and then press the
[ENTER] button.
10
When asked to confirm that you want to
store the kit, press the [ENTER] button to
proceed.
≥≥≥KIT≥Store
≥Are≥you≥sure?≥≥
CAUTION
• The message "Please keep power on..." will be dis-
played while data is being stored. It is very important
that the DTX-MULTI 12 is not turned off until this
message disappears. If the instrument were to be
turned off at this time, data for all User kits could be
permanently lost.
≥≥Please≥keep
≥≥power≥on...
11
To hear the imported wave, strike the
pad to which it was assigned.
26
Owner's Manual
VCE≥Store≥to
U001:User≥Kit
User kit number User kit name