Xerox 6030 User Manual page 18

Start Setup program on the host computer (Windows 98, Windows 2000, Windows XP)
from the CD in either of the following methods.
1. Use [Add/Delete program] wizard of control panel.
2. Use [Run...] from Start menu.
3. Open Setup program file from CD by using Explorer.
Installation Procedure
The followings is the installation procedure using [Add/Remove Programs] wizard.
Start the host computer (Windows 98, Windows 2000, Windows XP).
1
10
Chapter 2 Preparation
If you install the program in the method other than 1., select setup.exe and execute it.
If you are not accustomed to Windows file operation, it is recommended to use the
method 1.
This section explains the procedures using Windows 2000.
For the case of Windows 98, Windows XP, operations are the same as Windows 2000.
Open the Control panel and double-click (Windows XP single-click) on [Add/
Remove Programs].
[Add/Remove programs Property] will be displayed.