Xerox 6030 User Manual page 31

Custom size
Document width and length can be specified by 1mm increment. By clicking right
mouse button on either of [Width] or [Length], standard size width and length can be
specified from the list provided.
• If you select [Custom size], [Scan start position] and [Offset] can be specified.
• Mirror image (refer to [3]Contrast Reversal/Mirror Image) cannot be selected when
[Standard size custom specification] has been selected.
Offset
If you select [Standard size custom specification] or [Custom size] in standard mode,
[Offset] button becomes active. Click [Offset] button to open [Offset] dialog, and enter
the offset value. Offset value ranges from 0 to 310mm.
Up/Down
• If offset value is set beyond the size of the document, it becomes blank data or error.
• The initial point of offset is the point specified by scan start position adjustment.
Scan start position
[Scan start position] dialog box will be displayed when you click [Scan start position]
button.
You can set the scan start position by specifying the distance from lead and left edge of
the document. Available value range from the initial point is from -500 to 500mm for
fast scan direction, and -999 to 999mm for slow scan direction.
Up/Down
-(minus)
Document
*Auto size recognition in Scan Start Position adjusted mode
Left/Right
Original
+(plus)
+(plus)
(From the front side of the document)
3.1 Available scanning function
Left/Right
-(minus)
Document
23