Dell Precision 410 User Manual page 95

This chapter describes how to connect your computer system to external audio
devices that use the 16-bit integrated audio controller on your computer's system
board.
The integrated Crystal 4237B controller is Sound Blaster Pro-compatible and supports
the Windows Sound System. The 4237B controller has a Sound Retrieval System
(SRS) 3D stereo digital signal processing (DSP) engine that retrieves and restores spa-
cial sound information, directional cues, and other sonic nuances that are typically
missing or are altered by electronic reproduction of stereo sound.
This chapter also describes the audio application programs that Dell has installed on
your hard-disk drive, and it tells you how to reinstall audio drivers if necessary.
NOTE: The instructions in this chapter apply to systems using the integrated audio
controller. If you are using a sound card, use the connection instructions in the docu-
mentation that came with your sound card.
You can connect a variety of audio devices to your computer. Use Figure 6-1 to locate
the audio connectors on the input/output (I/O) panel on the back of your computer.
microphone jack line-out jack
line-in jack
)LJXUH  $XGLR &RQQHFWRUV
Before using any audio device, be sure that Sound in the System Setup program is set
to On (the default). For instructions, see Chapter 3, "Using the System Setup
Program."
Using the Integrated Audio Controller 6-1