Adding A Listed Card; Adding An Unlisted Card - Dell Precision 410 User Manual

The loaded card is not
a category card. Press
OK to proceed.
No more DMA values can
be added.
No more interrupt
values can be added.
No more memory values
can be added.
No more I/O port values
can be added.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.
Dell Precision 410 Mini Tower Systems User's Guide
C-4
FRQWLQXHG
The category you have
chosen is not the correct
category under which to
add this card.
No more values are avail-
able for the resource you
are trying to add or modify.
Select OK. The ICU automatically opens
the correct category's dialog box.
Continue the procedure for adding the
card as described in "Adding a Listed
Card" or "Adding an Unlisted Card" in
Chapter 4.
The maximum number of values for
each resource is as follows:
4 DMA channels
7 IRQ lines
9 memory address blocks
20 I/O ports
To free values for the resource you are
trying to add or modify, delete some of
the values listed in the resource box for
the card. If your card requires all of the
values listed, contact your card manu-
facturer to resolve the issue.