Dell Precision 410 User Manual page 124

Dell Precision 410 Mini Tower Systems User's Guide
9-10
securing
clips (2)
To remove a DIMM, press the securing clips outward simultaneously until the DIMM
disengages from the socket (see Figure 9-7). It should pop out slightly.
To take advantage of future options in speed and functionality, you can add a second
processor or replace either the primary or secondary processor.
Each processor and its associated L2 (level-2) cache memory are contained in an SEC
cartridge that is installed in a dedicated connector on the system board. In systems
with only one processor, a terminator card is installed in the secondary processor con-
nector. The following subsection describes how to install or replace an SEC cartridge
in either the primary or secondary processor connector.
2.
1.