Dell Precision 410 User Manual page 102

Dell Precision 410 Mini Tower Systems User's Guide
7-2
The 5.25-inch externally accessible drive bays at the front of the computer are nor-
mally used for non-hard-disk drive devices such as CD-ROM drives and/or tape drives.
These can be enhanced integrated drive electronics (EIDE) or SCSI devices.
The four internal drive bays (located in the drive cage beneath the externally accessi-
ble drive bays; see Figure 7-1) are used for either SCSI hard-disk drives or EIDE
hard-disk drives. Internal hard-disk drives are mounted vertically in a removable drive
bracket that can contain up to four 1-inch hard-disk drives or up to two 1-inch and two
1.6-inch hard-disk drives.
NOTE: Dell supports only the drives it furnishes.
)LJXUH  ,QWHUQDO 'ULYH %D\V
For detailed information about installing drives in either the externally accessible drive
bays or the internal drive bays, see Chapter 10, "Installing Drives."
Your system's SCSI drivers were installed at Dell and are operative when you receive
the system—no further installation or configuration is needed. The following sub-
sections provide instructions on reinstalling these drivers. Repeat the procedure for
each SCSI driver you want to install.
four-bay hard-disk
drive cage (internal)