Dell Precision 410 User Manual page 77

The ICU uses the default resources set by the card manufacturer whenever pos-
sible. If the ICU cannot find a resource that is valid for the card and available in
the system, the utility generates an error message. See Appendix C, "ISA Con-
figuration Utility Messages," for an explanation of the message and a possible
solution to the conflict.
If you are satisfied with the default resources assigned to the card, you can skip
the remainder of this procedure.
The Card Configuration dialog box (see Figure 4-3) displays all resources used by
the card. Some cards have multiple functions, each having one or more resources
associated with it. For example, a communications card can have fax, modem,
and scanner functions, each of which may have one or more associated
resources.
)LJXUH  &DUG &RQILJXUDWLRQ 'LDORJ %R[
The Configuration Settings dialog box (see Figure 4-4) displays the name of the
resource that you selected in the upper-left corner of the box. The resource
values currently associated with the selected function are displayed in the
Resources for Choice box. The resource values displayed are IRQ, DMA, Mem-
ory (Hex), and I/O Port (Hex).
)LJXUH  &RQILJXUDWLRQ 6HWWLQJV 'LDORJ %R[ IRU $VVLJQLQJ DQ
,54 /LQH
Using the ISA Configuration Utility 4-7