interface
connector
EIDE
cable
IDE1
connector
IDE2
connector
power input connector on drive
)LJXUH $WWDFKLQJ +DUG'LVN 'ULYH &DEOHV
To locate the IDE1 connector, see Figure 9-1.
NOTE: After you remove and replace the cover, the chassis intrusion detector will
cause the following message to be displayed at the next system start-up:
ALERT! Cover was previously removed.
See "Drives: Primary and Secondary" in Chapter 3.
DC power cable
'HOO 'LDJQRVWLFV 'LVNHWWH
Installing Drives 10-15