Dell Precision 410 User Manual page 181

At least one Plug and
Play card in your sys-
tem is not configured
due to conflicts. These
are marked "config err"
in the list of config-
ured cards.
Due to conflicts, the
ICU could only config-
ure some Plug and Play
cards in your system.
Unconfigured cards are
marked "config err" in
the list of configured
cards.
This device is uncon-
figurable because of a
resource conflict with
card card_name. The
conflicting resource
is resource_name. To
fix, reconfigure the
conflicting card.
The ICU has
successfully config-
ured all Plug and Play
cards in your system.
For the new
configuration to take
effect, save the con-
figuration, then
reboot your system.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.
FRQWLQXHG
The Configuration Manager
or the ICU cannot configure
at least one Plug and Play
expansion card because of
resource conflicts with one
or more cards.
The selected card is
unconfigurable because
one of its resources is
already being used by
another device.
The ICU has successfully
configured all of the Plug
and Play expansion cards
that were not configured by
the Configuration Manager.
You must reconfigure the conflicting
card(s). To find the conflicting card, per-
form the following steps:
config err
The Card Configuration dialog box
displays the functions assigned to
the Plug and Play expansion card.
Perform the following procedure:
resource_name
card_name
To accept these settings, save the con-
figuration information into NVRAM by
selecting Exit from the File menu and
then selecting Yes to save. You must
reboot your system for these settings
to take effect.
ISA Configuration Utility Messages C-3