Table of Contents
Advertisement
Error Display
Status Screen
VIDEO FORMAT
INCORRECT
MEDIA FULL
READING MEDIA INFO
GETTING OVERHEATED
PLEASE TURN P.OFF
BATTERY COM. ERROR
Tally Lamps
The tally lamps start blinking when the remaining space on the SDHC/SDXC card is running out during recording, or when the
battery power is running low.
Blinking Mode
Blinks slowly
(once every second)
Blinks quickly
(2 times a second)
Menu Screen
Thumbnail Screen
● Video format of the file for Clip
^
● [REC] button is pressed when the
^
● Remaining space ran out during
Memo :
● This error may appear even when
● Recording operation was
^
● Battery temperature rose.
PLEASE TURN P.OFF
● Communication error in battery
---
● Battery power is low
● Remaining recording time on SDHC/SDXC card is less than 3 minutes
● SDHC/SDXC card is full
● Error on the camera recorder
Status
Review is different from the [Frame
& Bit Rate] setting of the camera
recorder.
media in use has no remaining
space.
recording.
there is still remaining space
displayed on a PC, etc.
(A Page 20)
performed while inserted card was
being checked.
has occurred.
Remaining Battery Power/SDHC/SDXC Card Space
Action
Set [Camera Resolution] and [Frame & Bit
Rate] correctly. (A Page 63)
Replace the SDHC/SDXC card with a new
one.
When a card is inserted, press the record
button after the card slot status indicator
lights up.
● Turn off the power and wait for some time
before using again.
● Replace the battery.
● Replace the battery.
Advertisement
Table of Contents
