Preparation
Entering Text
It is possible to enter babies' and pets' names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
1
Display the entry screen.
•
You can display the entry screen via the following operations.
–
[Name] in [Face Recog.]
–
[Name] of [Baby1], [Baby2] or [Pet] in [Profile Setup]
–
[Location] in [Travel Date]
–
[Title Edit]
–
[LUMIX CLUB], [Device Name], [External AV device], [Wi-Fi Password], [Register to
Favorite]
(P215)
2
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
•
Move the cursor to [
text between [A] (capitals), [a] (lower case), [1] (numbers) and
[&] (special characters).
•
To enter the same character again, rotate the control dial right to move the cursor.
•
The following operations can be performed by moving the cursor to the item and
pressing [MENU/SET]:
–
[]]: Enter a blank
–
[Delete]: Delete a character
–
[ ]: Move the entry position cursor to the left
–
[ ]: Move the entry position cursor to the right
3
Press 3/4/2/1 to move the cursor to [Set] and then press
[MENU/SET] to end text input.
•
Text can be scrolled if all of the entered text does not fit on the screen.
(P174)
(P46)
(P196)
in the [Wi-Fi Setup]
] and then press [MENU/SET] to switch
(P176)
(P244)
menu.
64