Panasonic DMC-GH3KBODY Owner's Manual page 218

Wi-Fi
If you are not sure about the WPS compatibility (connecting by [Manual Connection])
Search for available wireless access points.
•
Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
•
When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the
wireless access point you are using.
1
Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
•
Touching [DISP.] will search for a wireless access point again.
•
If no wireless access point is found, refer to
with [Manual Input]
2
(If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters, refer to
section on P64.
When connecting with [Manual Input]
∫
1
On the screen displayed in step
compatibility (connecting by [Manual Connection])", select [Manual Input] by
pressing 3/4, then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
•
For details on how to enter characters,
3
Press 3/4 to select the network authentication type, and press [MENU/SET].
•
For information on network authentication, see the manual of the wireless access point.
4
Press 3/4 to select the encryption type, and press [MENU/SET].
•
The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
[WPA2-PSK]/[WPA-PSK]
[Common Key]
[Open]
5
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
"
on P218.
1
of "If you are not sure about the WPS
refer to "
[TKIP]/[AES]
[WEP]
[No Encryption]/[WEP]
"
When connecting
" "
Entering Text
"
Entering Text section on P64.
Encryption types that can be set
218