Connecting Directly - Panasonic DMC-GH3KBODY Owner's Manual

Wi-Fi
•
Check the wireless access points instruction manual and settings when a saving wireless
access point.
•
If no connection can be established, the wireless access point's radio waves may be too weak.
"
Refer to Message Display
•
Transmission speed may decrease, or may not be usable depending on the environment it is
used in.

Connecting directly

•
Directly connect this unit to the device you are using as a wireless access point. You can
connect this unit and your device in a method supported by your device.
Press 3/4 to select connection method, and then press [MENU/SET].
Connection method
TM
[Wi-Fi Direct]
[WPS Connection]
[Manual Connection]
" "
(P274) and Troubleshooting
1
Set the device to Wi-Fi Direct mode.
2
Press 3/4 to select [Wi-Fi Direct] and then press
[MENU/SET].
3
Press 3/4 to select the device to connect to, and then
press [MENU/SET].
•
Read the operating instructions of your device for details.
[WPS (Push-Button)]
1
Press 3/4 to select [WPS (Push-Button)] and then press
[MENU/SET].
2
Set the device to WPS mode.
•
You can wait longer for a connection by pressing the [DISP.]
button on this unit.
[WPS (PIN code)]
1
Press 3/4 to select [WPS (PIN code)] and then press
[MENU/SET].
2
Enter the PIN code of the device into this unit.
Enter the SSID and password into the device. The SSID and
password are displayed on the connection waiting screen of this
unit.
"
(P286) for details.
Description of settings
219